Autostart AS-6105 SH Manuel de service télécharger pdf (Page 24)

- 24 -

WA1

RM-Y1108

Service adjustments to this model can be performed using the

supplied remote Commander RM-Y1108.

‘TT—’ will appear in the upper right corner of the screen.

Other status information will also be displayed.

3. Press ‘MENU’ on the remote commander to obtain the following

menu on the screen.

4. Move to the corresponding adjustment item using the

up or down arrow buttons on the Remote Commander.

5. Press the right arrow button to enter into the required menu item.

6. Press the ‘Menu’ button on the Remote Commander to quit the

Service Mode when all adjustments have been completed.

Note :

• After carrying out the service adjustments, to prevent the

customer accessing the ‘Service Menu’ switch the TV set OFF

and then ON.

(ON SCREEN (DIGIT 5) (VOLUME +) (TV)

DISPLAY)

1. Turn on the power to the TV set and enter into the stand-by

mode.

2. Press the following sequence of buttons on the Remote

Commander.

SECTION 3 ADJUSTMENTS

3-1. Signal Adjustment

How to enter into the Service Mode

3-2. White Balance Adjustment

VTLENAPTNEDIRT

REDOCEDAMORHC

THGILKCAB

DNUOS

TSUJDAFI

UNEMRORRE

12.0v1AW

hFFhFFatadyrotcaF

0987654321:REBMUNLAIRES

3RS02-VLK egnar

xx8972.0

DNJ8.0

yy3282.0

YY- A/N

3RS02-VLK egnar

xx8972.0

DNJ8.0

yy3282.0

YY- A/N

3-1-1.

PAL auto adjustment (CVBS)

1. Select AV1 and input PAL signal.

2. Change the TV to Personal Mode and set the following registers.

Contrast - 90

Brightness - 50

Colour - 50

3. Set the TV in Service Mode (See opposite) and send “TT51”

command.

3-1-2.

PAL auto adjustment (RGB)

1. Select AV1 and input RGB signal.

2. Change the TV to Personal Mode and set the following registers.

Contrast - 90

Brightness - 50

Colour - 50

3. Set the TV in Service Mode (See opposite) and send “TT52”

command.

3-2-1. White Balance adjustment (H/L)

1. Select AV1.

2. Change the TV to Personal Mode and set the following registers.

Contrast - Max

Brightness - 50

Colour - 50

Backlight - Max

3. Input PAL CVBS 70 IRE Full Field Signal to AV1.

4. Enter the ‘SERVICE MENU’ using the cursor keys on the remote

commander.

5. Adjust Highlight registers:

NORMAL_PAL_RD (R Drive)

NORMAL_PAL_BD (B Drive)

High light adjustment value (10500K-6MPCD)

3-2-2. White Balance adjustment (C/O)

1. Select AV1.

2. Change the TV to Personal Mode and set the following registers.

Contrast - Max

Brightness - 50

Colour - 50

Backlight - Max

3. Input PAL CVBS 20 IRE Full Field Signal to AV1.

4. Enter the ‘SERVICE MENU’ using the cursor keys on the remote

commander.

5. Adjust CutOff registers:

NORMAL_PAL_RC (R cutoff)

NORMAL_PAL_BC (B cutoff)

Low light (Cut Off) adjustment value (10500K-6MPCD)

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 53 54

Commentaires sur ces manuels

Pas de commentaire

Autostart AS-6105 SH Manuel de service Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Les démarreurs à distance Autostart AS-6105 SH