Autostart AS-6105 SH Manuel de service télécharger pdf (Page 15)

– 15 –

WA1

RM-Y1108

Connecting a VCR

To connect a VCR, please refer to the section “Connecting the aerial and VCR” of this instruction manual on page 20.

Connecting a VCR or a DVD recorder that supports SmartLink

SmartLink is a direct link between the TV set and a SmartLink compatible VCR/DVD recorder. For more

information on SmartLink, please refer to the instruction manual of your SmartLink VCR/DVD recorder.

If you use a VCR or a DVD recorder that supports SmartLink, please connect the VCR or the DVD recorder to the

TV using a Scart lead to the Scart 2/

If you have connected a decoder or a Set Top Box to the Scart 2/

or through a

VCR connected to this Scart

Select the “Manual Programme Preset” option in the “Set Up” menu and after entering in the “Decoder**” option,

select “On” (refer to page 33). Repeat this option for each scrambled signal.

**This option is only available depending on the country you have selected in the “Country” menu.

Connecting Audio Equipment to the TV

To listen to the sound from TV on Hi-fi equipment.

Connect your audio equipment to the audio output sockets E if you wish to amplify the audio output from the TV.

Next, using the menu system, select the “Features” menu and set the “TV Speakers” to "Permanent Off" (see page

29).

The volume of the external speakers can be altered by pressing the volume buttons on the TV remote control.

The treble and bass setting can also be altered through the “Sound Adjustment” menu (see page 27).

Viewing pictures from equipment connected to the TV

1 Connect your equipment to the designated TV socket, as indicated on page 36.

2 Switch on the connected equipment.

3 To watch the picture from the connected equipment, press the / button repeatedly until

the correct input symbol appears on the screen.

Symbol Input Signals

1 • Audio / video input signal through the Scart connector G

1 • RGB input signal through the Scart connector G. This symbol appears only if

an RGB source has been connected.

2 • Audio/video input signal through the Scart connector F.

2 • S Video Input signal through the Scart connector F. This symbol appears only

if an S Video source has been connected.

3 • Video input signal through the phono socket B and Audio input signal through

3 • S Video Input signal through the side S Video input jack A and Audio signal

through C. This symbol appears only if an S Video source has been connected.

4 Press the button on the remote control to return to the normal TV picture.

For Mono Equipment

Connect the phono plug to the L/G/S/I socket on the side of the TV and select 3 or 3

input signal using the instructions above. Next, refer to the “Sound Adjustment” section of this

manual and set “Dual Sound” option to “A” on the sound menu screen (see page 27).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 53 54

Commentaires sur ces manuels

Pas de commentaire

Autostart AS-6105 SH Manuel de service Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Les démarreurs à distance Autostart AS-6105 SH