Autostart AS-6105 SH Manuel de service télécharger pdf (Page 13)

– 13 –

WA1

RM-Y1108

Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the best possible picture,

however you can manually fine tune the TV to obtain a better picture reception in case the picture is distorted.

To do this:

While watching the channel (TV Broadcast) you wish to fine tune, and once you have entered the “Set Up” menu

as it is explained on page 30 and after selecting the "Manual Programme" option, press

Then press

to select the AFT option and press

b. Next press

to adjust the fine tuning between -15 and +15. Finally

press

OK twice to store.

Improve the sound for individual channels in the case of distortion in mono broadcasts. (Not available when

“System” is set to “L”.)

Sometimes a non standard broadcast signal can cause sound distortion or intermittent sound muting when

watching mono programmes. The Audio Filter option allows you to reduce this effect.

If you do not experience any sound distortion, we recommend that you leave the Audio Filter option set

to the default setting of “Off”.

To do this:

Once you have entered the “Set Up” menu as it is explained on page 30 and after selecting the “Manual

Programme Preset” option, press

OK. Next, press

to select the Audio Filter option and press b. Next

press

to select Off, Low or High.

You can not receive stereo or dual sound when “Low” or “High” is selected.

Skip any unwanted programme numbers when they are selected with the PROG +/- buttons.

To do this:

Once you have entered the "Set Up" menu as it is explained on page 30 and after selecting the "Manual

Programme Preset" option, press

OK. Next with the Programme option highlighted, press the PROG +/- button

to select the programme number you want to skip. When the programme you want to skip appears on the screen,

press

to select the Skip option and press

. Next press

to select On. Finally press OK twice to

confirm and store.

To cancel this function afterwards, select “Off” instead of “On” in the step above.

View and record scrambled channels (e.g. from a pay TV decoder) when using a decoder connected to Scart

2/ directly or through a VCR.

This option is only available depending on the country you have selected in the “Country” menu.

To do this:

Once you have entered the "Set Up" menu as it is explained on page 30 and after selecting the "Manual

Programme Preset" option, press

OK. Next press v or V to select the Decoder option and press b. Next press

v or V to select On. Finally press OK twice to confirm and store.

To cancel this function afterwards, select "Off" instead of "On" in the step above.

Other Functions

Sleep Timer

This function allows you to set the TV to switch itself automatically to standby mode after a

specified time period. The following time periods can be selected: 30, 60, 90 and 120 minutes.

To do this:

Press the - button on the remote control repeatedly until the desired time period appears on the

screen.

When the Sleep Timer feature is on, the (Standby/Sleep) indicator on the TV lights up in red.

To cancel the Sleep Timer feature:

Press the button on the remote control repeatedly until “Off” appears on the screen.

• If you switch off the TV and switch it on again, the Sleep Timer feature is reset to “Off”.

• Press the button on the remote control to display the time remaining before the TV

switches to standby mode.

• The message “Sleep Timer will end soon. Power will be turned off.” Appears on the screen

1 minute before the TV switches to the standby mode.

Picture Freeze

This function allows you to freeze the TV picture (e.g. to make a note of a telephone number or

recipe).

To do this:

Press the button on the remote control to freeze the picture. A window is displayed in the

bottom left of the screen showing the currently selected channel. Press the button again to

remove the window. Press the button again to cancel the Picture Freeze and return to normal

TV mode.

Adjusting the position of the Picture Freeze window

The position of the window displaying the currently selected channel can be adjusted.

To do this

With the TV in Picture Freeze mode, press the

buttons to adjust the position of the

window on the TV screen.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 53 54

Commentaires sur ces manuels

Pas de commentaire

Autostart AS-6105 SH Manuel de service Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Les démarreurs à distance Autostart AS-6105 SH